ServiceTechHelp.com Aricle Index
Visit Our Home page
Visit Our Public site
Visit Our Discussion Forum
Fisher & Paykel USA dishdrawer- DD602 Prefinished DD602I Integrated installations
There are 24 pages here. Table of Contents
1.1 Preparation
1.2 Product Specifications & Cavity Dimensions
1.3 Options for Installing Multiple Products
1.4 Electrical , Plumbing & Drainage Information
1.5 Product Parts
1.6 Additional Product Parts for Integrated DishDrawer
2 Foot Slide Retainer Information
2.1 Assembling the Foot Slide Retainer
2.2 Securing the Foot Slide Retainer
Section 3 Fitting the DishDrawer
3.1 Connecting the Services
3.2 Flexible Extrusion Attachment for 24 & #148 ; by 341/2” ; (610mm x 876mm) Cavity
3.3 Adjusting the Feet
3.4 Fitting the Endplate to the Chassis (Optional)
3.5 Securing the DishDrawer
4 Prefinished Toe Kick Installation
4.1 Setting the Upper Toe Kick Height
4.2 Trimming the Lower Toe Kick
4.3 Trimming the Toe Kick Pins
4.4 Adjusting the Upper Toe Kick
5 Information for Cabinet Maker for Integrated DishDrawer
5.1 Integrated Drawer Front & Toe Kick Dimensions
6 Integrated Drawer Front Installation
6.1 Changing the Integrated Badge Enclosure
6.2 Disassembling the Integrated Badge
6.3 Assembling the Integrated Badge
6.4 Fitting the Badge , Handle & Mounting Panel to the Drawer Front
6.5 Fitting the Drawer Front Panels to the DishDrawer
7 DishDrawer Toe Kick Information
7.1 Integrated Toe Kick Installation
8 Final Checks
8.1 Installation Wet Test
8.2 Troubleshooting 599065
Article Number 2292